Poached Posted July 23, 2010 Share Posted July 23, 2010 Hello Guys My mum has just brought me a r-com 20 pro(Thats 3 Incys Now!!) and i need to know : Do you put anything on the bottom of your r-com or just leave the plastic on the bottom and how does it turn the eggs?? Thanks Josh Quote Link to comment Share on other sites More sharing options...
Redwing Posted July 23, 2010 Share Posted July 23, 2010 The bottom of the inccy has a grey flat bit of plastic which slides from side to side to turn the eggs, on the Pro I think the settings switch this off at day 18 (on my more basic one I have to press SET and TURN to switch the sliding on at the start and off at day 18) Rcoms have two different tray set ups 1) plastic trays with holes in which you place on top of the grey bottom of the inccy and place an egg in the dips 2) a universal set up where you have dividers between lines of eggs whichever you have as long as the settings are correct the grey base will slide at regular intervals turning the eggs - the eggs dont turn far but thats fine At day 18 the turner is switched off (I think the pro does that automatically but check the instructions) the holey tray or dividers are removed and a mat placed in the grey bottom for the checks to hatch on - Rcom make a black mesh hatching mat which fits in to the bottom and is good but plastic texture matting or cloth will be ok to use too Quote Link to comment Share on other sites More sharing options...
