Sarattie Posted March 30, 2019 Share Posted March 30, 2019 Hello. I'm looking to buy an auto door for my mk2 cube. Do I need to remove the run from the main house to fit it? My run is partially buried and there is no way I could unassemble from the main house so I would need to crawl into the run to fit it, but is this even possible!? Many thanks Sarah Quote Link to comment Share on other sites More sharing options...
Luvachicken Posted March 30, 2019 Share Posted March 30, 2019 Hubby fitted mine, admittedly to the original cube, but he didn't need to move anything at all. I hope this helps even though I don't have the cube you have. Quote Link to comment Share on other sites More sharing options...
Sarattie Posted April 1, 2019 Author Share Posted April 1, 2019 Thank you Luvachicken I emailed omlet and they were able to send me the assembly instructions which shows that I only need to removed the house lid so the run can stay put. However, it looks like the timer unit goes on the side that I have against a bush / wall so the solar panel will be shaded from any light so may not be long enough to reach the front egg box side anyway. :/ Looks like old school move it myself it is! :D Quote Link to comment Share on other sites More sharing options...
Luvachicken Posted April 22, 2019 Share Posted April 22, 2019 I don't use the light sensor bit, just the timer switch, if you did the same you could put it where you need to. Quote Link to comment Share on other sites More sharing options...
