Omlet app update does not work on ios27

[AbigailGrace]

Hello..

I'm sure someone has wrote this before but i couldn't find it..

 

What do you use to hold the glug and grub in your walk in run. As the wire i am to purchase is roughly an 1"x1"..

I'm sure i have seen someone use one of those ikea rails..

 

http://www.ikea.com/gb/en/catalog/products/20115745

 

What size did you get and can it hold both grub and glug.. Also what do you do about the superglug as I am thinking about getting one when I build the walk in run.. How high do you place it.. Do you again use the ikea rail?

 

Any ideas more than welcome!

 

Thankyou

Abigail Grace

[Redwing]

Those rails are perfect, the longer one holds both, the shorter one doesnt hold both

 

Mine are about a foot from the ground

[mostin]

and if that doesn't work, do the cheap tacky version like I did . Cable ties fastened through the wires to make loops which I hang the feeders from .

[Ain't Nobody Here]

I've cabled tied a bit of laminate flooring to one of the WIR panels - the groove is just right for the hooks on the glug/grub .

[kevtheplumber]

i screwed a bit of 4mm plywood onto the kick board i have. They sit on that perfectley

[cockadoodle1]

B&Q do a nice aluminium angle, this wont rot like laminate flooring which is only paper.

Screw a batten across two uprights and screw said angle to top at height to suit. it works perfectly

[chick wiggle]

My WIR has the 1"x1" and all i did was cut one piece of wire off making a 2"x1" gap, perfect fit for the super glug and grub! They just hang on the wire.