lollipop Posted August 19, 2011 Share Posted August 19, 2011 Hi can anyboldy help? I am trying to replace the black lid locking bar in my eglu classic as the existing one has snapped! Omlet say that I just need to pull it out and push the new one in place but I have spent the last 2 hours trying to pull or push it out. There is quite a lot of play in it, it moves about 4 inches but won;t budge further than than. Help! thanks Quote Link to comment Share on other sites More sharing options...
Lewis Posted August 19, 2011 Share Posted August 19, 2011 If you take the shell off you'll see a couple screws inside the eglu attaching the front face to the tray, theres also a couple on the bottom of the front face at inside the big holes. Try unscrewing those and then its as easy as they say! Sorry, not explaining it very well but hope you know what I mean Quote Link to comment Share on other sites More sharing options...
squiffs Posted August 19, 2011 Share Posted August 19, 2011 Hi lollipop - do you mean the eggport handle or the eglu door? Quote Link to comment Share on other sites More sharing options...
Lewis Posted August 19, 2011 Share Posted August 19, 2011 I assumed the flat black bar at the bottom of the classic that keeps the shell in place with the lynch pin? Quote Link to comment Share on other sites More sharing options...
squiffs Posted August 19, 2011 Share Posted August 19, 2011 Ooh - I was going ask because my eggport door handle is very loose nevermind! Quote Link to comment Share on other sites More sharing options...
Redwing Posted August 19, 2011 Share Posted August 19, 2011 yes you remove the front from the base by removing the two long screws, loosen them carefully as its easy to wreck the cross slots on the top then you are stuck! Quote Link to comment Share on other sites More sharing options...
