Eggasperated Posted May 8, 2013 Share Posted May 8, 2013 Make another jumper from my Eco wool pattern but using a different yarn. The Eco wool knits at 16st and 22 rows to 10cm on 6.00mm needles, I would like to substitute Sirdar crofter chunky which is 14st and 19 rows to 10cm on 6.5mm needles. Is it possible to use the same Eco wool pattern or would it need radical altering (which I don't think I can do) or should I buy a new pattern? Quote Link to comment Share on other sites More sharing options...
Plum Posted May 8, 2013 Share Posted May 8, 2013 I'd check the tension and if you get same no to inch wouldn't that work or am I being naive Quote Link to comment Share on other sites More sharing options...
chickencam Posted May 9, 2013 Share Posted May 9, 2013 It would probably knit up ok but you would have to watch your quantities because yarns are all different weights and can be a very different length per 50/100g ball. Quote Link to comment Share on other sites More sharing options...
Eggasperated Posted May 9, 2013 Author Share Posted May 9, 2013 Thank you chickencam hadn't thought about length but just checked and Eco is 80m, Crofter is 78m - so not much in it. This knitting lark isn't as easy as you think is it . Have passed my felted jumper on to Lesley so at least it hasn't gone to waste . Quote Link to comment Share on other sites More sharing options...
Olly Posted May 9, 2013 Share Posted May 9, 2013 Plum is right, you'll need to check how it knits up with a test square, otherwise the jumper will knit ok but it won't come out at the right size. Two stitches doesn't sound much but for example if your pattern has 112 stitches, that would come up at 70 cm in the Eco but 80 cm in the Sirdar wool. Length isn't always such a problem as often the shaping is in the first few rows and then it says 'knit to desired length'. You might find using a smaller needle will reduce the size enough ... I am not a knitting expert, but usually the pattern-writer has tested it out to work with a particular type of wool. It would be really frustrating to knit 2/3 of a jumper and then find it wasn't going to fit! Quote Link to comment Share on other sites More sharing options...