Cube mk2 and WIR

[Rachel33pink]

Hi, I am planning on moving my eglu and run to a different place in the garden. Previously I pegged the run down with tent pegs but this is a real pain when I want to clean or move the run.

 

Is it necessary to do this? The land is relatively level but I am worried about foxes. Any ideas please?

 

Thanks Rachel

[Egluntyne]

I weigh mine down with boulders if that is any help.

 

I found that tent pegs, or Omlet run pegs worked loose if the ground was either very wet or very dry.

[lisa33]

I use the screw in tent pegs.

 

Andyman cut down the screw in attachment so we can use it with the electric drill/screw driver. 2 minute jobbie.

[Ain't Nobody Here]

Don't know if this is practical if your run's on grass, but I use bits of old slabs on the skirt on my run. Easy to push to the side with your foot when you need to.

[Sandychick]

Previously I pegged the run down with tent pegs but this is a real pain when I want to clean or move the run.

 

I've decided not to bother as it was a hassle. I find it enough of a struggle moving an eglu, run + converter about on my own without trying to find the pegs in the mud as well!

The ground was uneven so I wouldn't have risked it then, but I have just moved them and leveled the ground so that the skirt is flat to the ground. I understood that it is ok without pegs if the ground is flat.......I hope so anyway

[Hen Watch]

I have some bricks on the run skirt and a few heavy plant pots too. But the ground is level (and heavy clay) so I'm not worried that a fox would get under the run.

 

I use tent pegs to hold down the Omlet netting or else the girls would easily get under it.