Smart Feeder - Light sensor values

[chocolatedog]

Has anyone ever unscrewed the 2 screws holding on the front of the eglu (with the door assembly etc?) once all the removable parts of the eglu have been taken off, that is? The reason I'm asking is because it seems to be the only bit of the eglu that has a crack that never seems to wash out quite properly.......having said that,we've has the eglu for 3 years and never has a mite problem, but neither have I ever taken the front off to clean out that gap. For anyone who has done it, how easy is it to reassemble afterwards? I'm a bit scared of little bits of internal workings falling out or something, and not being able to get it all back together again!!

[bronze]

yes I do (when I use it)

since last year when I had mite problems I wouldnt have thought of

[Mercedes55]

I've never taken mine apart like that so far, but I do agree that bits do tend to get stuck down there. I just make sure I put a good spray of poultry shield in there and let it dry out in the sun. I imagine I will have the same problems when I do a good clean of the Cube, haven't got around to seeing how easy that is to take apart yet

[Ain't Nobody Here]

I've only done it once (there was a load of bedding stuck down there which was bugging me ). I wouldn't want to do it too often, it's a bit of a job getting the screws back in - not difficult just not something I'd want to do regularly. I tend to blast that bit with the powerwasher that bit now instead.

[Alis girls]

I have a Eglu Go - is this the back door or front? I darent undo mine as I'd never get it back together do bars and nesting box and squirt shield in holes etc.