Jump to content
thenewchick

Brinsea Mini Advance incubator help!

Recommended Posts

Hi

 

I have just been given a Brinsea Mini Advance incubator for my birthday and was very pleased :D However, on reading the instructions inside the box it all seems very confusing :? I thought I was just going to put the eggs inside switch it on and in 21 days hey presto seven chicks!! What is :? is that it says to keep humidity at a constant level of 50 during the hatching process (below that when turning eggs). I just can't see where it tells me what the humidity level is? Is it just a matter of filling both sides of the pot with water and it will be at 50?

 

Sorry if this sounds a bit of a stupid question but just dont want to do somthing wrong when wee chicks lives are at risk. (hatch) I hope someone with the same equipment can point me in the right direction.

 

Thanks :)

Link to comment
Share on other sites

all I did was to keep one half of the water pot filled up to the top untill the last day of turning then fill the other half up as well one tip once the auto turn has finnished take the turning ring out I didb't and it got in the way as the chicks hatched. if you do as shearch on this forum for Brinsea Mini Advance you.ll find a couple of threads from earlier in the year that should help you as there are a few of us that have used the Mini Advance for the first time with good results

Link to comment
Share on other sites

I was just as confused about humidity, I bought a hygrometer for £5.99 on ebay and popped that in with the eggs, it didn't get in the way just got kicked around a bit during hatching :lol: I ran my incy dry and it stayed naturally at 30, on day 18 I filled up the chambers and it rose to 50, I had a 100% hatch. Other people run dry and have had success :D

Link to comment
Share on other sites

I have currently got my first eggs in the same incy, mine are duck eggs. I read the instructions and thought it all sounded very complicated (im not good with technology!). But after reading the instructions again and taking it a step at a time, set on automatic with one half of pot full with water,so far so good it seems to look after itself. I am 2 weeks in and five of the six are fertile and wiggling away 2 weeks later. I did buy a hygrometer from pets at home in the reptile area cost £5 which just fits nicely in 1 of the egg slots as most eggs are sold in 6 so you have an empty slot.

Just hoping the hatch now goes well, its very exciting, my hubby thinks im mad I talk to them everynight!!!! :D

Link to comment
Share on other sites

I was just as confused about humidity, I bought a hygrometer for £5.99 on ebay and popped that in with the eggs, it didn't get in the way just got kicked around a bit during hatching :lol: I ran my incy dry and it stayed naturally at 30, on day 18 I filled up the chambers and it rose to 50, I had a 100% hatch. Other people run dry and have had success :D

 

 

Just wanted to MASSIVELY agree with the above post... I have had 4 years of incubating experience with every type of incubator going and would just ilke to stress one thing....

INCUBATE DRY until day 18 stop turning the eggs and then raise humidity to 50 - 60% had great results doing it this way.

More chicks die as a result of too high humidity than too low.

 

I use the mini advance in our local primary school - great visibility and great results...

 

Good luck.

Bev

Link to comment
Share on other sites

Thanks for all the advice - I didnt really put much water in the incubator until the last couple of days, all six eggs hatched (one was infirtile and was put out on day 14) and are all fine chicks now two weeks old. I was very pleased with my first attempt at hatching and just now praying that they are all girls now!! :pray:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...