Helen McCourt Posted May 5, 2018 Share Posted May 5, 2018 Hi, has anyone had a problem attaching the run to the roof of the Eglu Go house? The sides fit fine but the run piece that should attach to the roof seems the completely wrong shape. Thanks Quote Link to comment Share on other sites More sharing options...
Cat tails Posted May 5, 2018 Share Posted May 5, 2018 Do you have a Go Up? With me the roof panel was slightly flatter than the arch in the roof of the Go. But managed just to squeeze it in. Quote Link to comment Share on other sites More sharing options...
Helen McCourt Posted May 5, 2018 Author Share Posted May 5, 2018 Hi, no it’s just the standard Go. I’ve looked at the video and it seems that it should just slot under two ridges in the roof but ours isn’t the right shape to do that. Thanks for replying. Quote Link to comment Share on other sites More sharing options...
mullethunter Posted May 5, 2018 Share Posted May 5, 2018 Yes!! I have a Go. He run has never fit into the roof properly like it’s supposed to. I can force it in (it’s basically too curved / high at the top right?) but it doesn’t really stay. I’m satisfied that nothing can get in because there isn’t actually a gap, and because the run sides are attached to the house and the run roof is well clipped to the run sides it isn’t going to go anywhere (mine’s been in use on and off for 4 years now), but it is a bit annoying isn’t it. Quote Link to comment Share on other sites More sharing options...
Patricia W Posted May 5, 2018 Share Posted May 5, 2018 If in doubt, phone Omlet office on Tuesday. I’ve always found them very helpful. The more people feedback the better as well. In cases where my run hasn’t fit together properly, I’ve resorted to cable ties. They seem to pull things together better than the omlet clips. Quote Link to comment Share on other sites More sharing options...
Andrea Posted May 6, 2018 Share Posted May 6, 2018 We’ve put our Eglu go coop and run together today (first rescue chickens arriving next weekend 😊) and we had this problem with one side of the run slipping out of the roof but seems secure now we have cable tied some bits of the run together to make it more stable than the clips do Quote Link to comment Share on other sites More sharing options...