Jump to content

Recommended Posts

Well cube only arrived yesterday, it already had a "spout" fitted.. been raining all day so thought I'd go and have a quick peek in nestbox to check.. and yes a puddle of water sat there. Not impressed as supposed to be fixed and Omlet built it too :evil:

 

Any ideas??

Link to comment
Share on other sites

Contact them and let them know straight away.

 

Redfrock fixed her leak with **this** clever gizmo.

 

Thanks Egluntine... is there anyone in particular to email? I've read the other threads on this but was assured it was sorted when I ordered.. not funny when they cost so much! Really pity the others who have had leaking cubes for ages!

Link to comment
Share on other sites

Where is the leak?

 

On my new Cube, when the rain is emptying down I get a very small amount of water collecting in the front half of the nesting box. Ordinary rain doesn't come in at all.

 

By feeling the inside of the roof, I have located it as coming in where the roof joins on at the front right. I stuffed a bit of kitchen paper in there, and it has cured the problem. I will replace with something more sturdy next time there is heavy rain.

 

This is not the same as the earlier more serious leaking, which has been cured by the spout. (Strangely, I didn't have this problem with my first Cube, and have not used the fix.)

 

I can't see any solution to the miniature gap I have apart from having the Cube remade, and that might create other problems. We only get this kind of rain once or twice a year, so I think I will just live with it. It would be different if water came in every time it rained.

Link to comment
Share on other sites

The leak is on the right as you look into the nest box.. its quite a large amount enought to soak any bedding that would be there?? I take your point it is probably no where near as bad as the earlier leaks but this was in "normal" rain, nothing really heavy so in very bad rain I think the amount of water coming in would be much worse?

 

I am happy to try a "fix" but its just a bit disappointing as was assured this amended model would not leak.. :(

Link to comment
Share on other sites

Hi,

 

Sorry to hear about your leak.

 

I don't think you should try to fix this leak yourself, I think you should get onto Omlet and ask them to sort it out. As you say, this is the new model and it shouldn't be leaking! So far, mine seems ok, and I think it's pot luck!

 

Is the ground the cube on flat? It's not sloping any direction at all?

 

Diane

Link to comment
Share on other sites

Hi,

 

Sorry to hear about your leak.

 

I don't think you should try to fix this leak yourself, I think you should get onto Omlet and ask them to sort it out. As you say, this is the new model and it shouldn't be leaking! So far, mine seems ok, and I think it's pot luck!

 

Is the ground the cube on flat? It's not sloping any direction at all?

 

Diane

 

Hi Diane, Glad your is ok as think you have enough to contend with right now :( .. the cube is on reasonably flat ground and I have emailed James so will see if he has any advice..

Link to comment
Share on other sites

I'm begining to think that they should send all of us to have had leaky cubes the 'new and improved' back panel - although that obviously woundn't help Egg Lou :?

 

Meanwhile I need to get onto to Omlet because they have only sent me one retro kit, not two. Not that I need them, but if ever I do decide to sell ...

 

Meanwhile I wonder how Daniel is getting on???

Link to comment
Share on other sites

I could be wrong but the "improvement" only has a flexible spout pushed through the existing hole in the top.. so don't believe the actual panel has been adjusted.

 

Do feel sorry for those of you who have had this problem for some time :?

Link to comment
Share on other sites

I could be wrong but the "improvement" only has a flexible spout pushed through the existing hole in the top.. so don't believe the actual panel has been adjusted.

 

Do feel sorry for those of you who have had this problem for some time :?

 

Oh, so they haven't remoulded it then :shock:

Well, I hope they sort it out for you promptly x

Link to comment
Share on other sites

Hmm.

I presumed that the back panel was remoulded now.

When I ordered my reconditioned cube I asked was is one of the re-modelled ones, & was told yes........

 

Oh I wouldn't quote me on this as I have never seen the "older" version.. just presumed because it had this spout thing that was it!

 

I'm happy to post a photo later if that would help see if there are any changes??

Link to comment
Share on other sites

Having seen both, I can say that the panel has been remoulded. In fact, you're probably getting the cube I demonstrated at the Grand Designs show, which had the spout and the remoulded runnels to channel the water down.

My cube :?::shock:

Has it been on telly then? :lol:

Anyone want its autograph? :wink:

Link to comment
Share on other sites

Having seen both, I can say that the panel has been remoulded. In fact, you're probably getting the cube I demonstrated at the Grand Designs show, which had the spout and the remoulded runnels to channel the water down.

 

 

Oh thank you for clearing this up.. good news mine is remolded.. bad news it still leaks hmm

Link to comment
Share on other sites

Do tell James about it

 

I did, and he has asked me for photographs to show where the water is coming in. They do need to know exactly what the problem is.

 

Where the water ends up is not necessarily directly underneath where the water came from (unless you used a spirit level for the ground under your Cube). Feel the inside of the roof to find the damp spot.

Link to comment
Share on other sites

I fitted a length of hose pipe into the channels of ours and glued it in place with silicon sealant.

 

It does still leak a little when the hose gets overwhelmed but I think the Omlet 'Blue Peter' patch with sort that out.

 

It takes a serious amount of water to cause a leak now though.

 

I can't understand why they didn't issue one long 'Blue Peter' patch to enclose the entire sides of the back panel, in effect making it into a pipe.

 

It would definately not leak then.

 

Kev.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...