Jump to content
Blackrocksrock

Quilting feet for machines ADDITIONAL

Recommended Posts

A walking foot is good for sewing through several layers as it feeds both top and bottom fabrics through and avoids one layer creeping further than the other (in theory :? ). Good for quilting straight lines or geometric patterns. You can also use a darning foot with dropped feed dogs for free hand quilting where you want a more fluid quilt pattern. They are both for when you get to quilting though. The other foot you might want to consider is a 1/4" foot which helps you stitch accurate 1/4" seams in your patchwork. :D

Link to comment
Share on other sites

I have some squares which have not been finished yet but I have bought a cot quilt top (humpty dumpty!) and backing fabric and already have the batting for the middle so its really the quilting I am nervous about and the finishing! - I will practice with the darning plate and no foot I think but I need to get the 1/4 inch foot for the future and think about the walking foot.

Link to comment
Share on other sites

You can still quilt with a normal foot if it's mainly straight lines you are doing :D Use a longer stitch length, slacken the top tension, make sure your layers have loads of basting to keep them from slipping, stitch slowly and start at the centre and work your way to the edges. Go for it! 8)

Link to comment
Share on other sites

I use a walking foot on my machine all the time quilting or sewing. It really is for straight or wavy (with less pressure) quilting lines. The open toe quilting foot is for doing free machine quilting. It allows the fabric to be moved as you sew so you can do squiggles and chickens and things. It has a little prong that sits on the needle screw and lifts the foot up with each stitch. :D

Link to comment
Share on other sites

I have tried the darning foot and the plastic top on the dogs - its just wonderful - unfortunately I am all over the place but boy is it good fun Now I can see quilting as it is meant to be!! Now which foot will I need as I cannot do it freehand?! :? I can do straight lines no problem but to do round bits and pieces I am not good - will still have to price the different feet.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...