Jump to content
beingmaisie

New electric hen, cant get temperature high enough

Recommended Posts

I have just bought an electric hen, its 40cm square. I plugged it in at 9 today and its still not gone above 30 degrees C.

 

I have it set at about 3-4 inches about the floor.

 

What am i doing wrong. Should it be lower? It seems amazing to me that they could live under something that low already. The egss are due to hatch on Sunday so i really want to get things sorted before then and make sure it warmed up okay.

 

Any advice appreciated, thank you

Link to comment
Share on other sites

Hi there

 

I nearly got one of these but everyone had sold out when I had plucked up the courage.

 

To start with I had a terracota plant pot with an ordinary bulb inside, then we went to a heat lamp for my chicks so that I can raise the height as they grow. :D

 

This was from a chick breeding site:-

When using a brooder, start the chicks at 90° to 95° F, measured 2 inches off the floor under the edge of the hover. Reduce the temperature by 5°per week until the supplemental heat is no longer needed. Observe the chicks to gauge their level of comfort. If they crowd together under the brooder, increase the heat, but lower the temperature if they tend to move away from the heat source. Allow 7 -10 square inches of space under the brooder for each chick. Start the brooder the day before the chicks arrive and adjust to proper operating temperature.

 

Mine, now 4 wks old today spent 10 mins outside on Sunday afternoon and 2 hours out this afternoon in the sunshine so far. :dance:

 

Hope this helps

 

Good luck!

Link to comment
Share on other sites

when I googled it I got this....

 

"The Lonesome Electric Chicken is a time and life wasting application that spews forth a gathering of quotations. That's it. Don't look any farther into it than that."

 

Ooh er.....

 

Tricia

 

:lol:

Link to comment
Share on other sites

I've got one but I never thought to measure the temperature. It felt hot and my chicks survived, maybe by more luck than judgement :lol: I found it was a pain to alter the height of it, surely they can find a way of making it easier, clamps instead of bolts maybe? Anyway, I just made sure it was low enough to be in line with their backs. I've raised two hatches so it can't be too cold I guess. I found it heated up really quickly, within 15 minutes or so.

Link to comment
Share on other sites

I never record the temp.....it depends on other factors too, such as outside temp. I just observe the chicks behaviour. If they're huddled and cheeping loudly they're too cold, if they're sleeping in a ring under, but not far away from the heat source they're fine, and if they're sleeping on the perimeter of the brooder, too hot.......just watch and see what they tell you :D

 

With an electric hen they should be happy to come in and out to feed and drink randomly, but again not be permanently huddled under it, or outside avoiding it.

 

1389.jpg

Link to comment
Share on other sites

I have the same model as fees. Set up and ready. I think 3-4 ins might be a bit too high for starters. As the chicks get bigger you would want to raise it.

 

I have set mine at about the same level as fee's and that is about 5cms /2ins-ish. It is pleasantly warm underneath.

Link to comment
Share on other sites

:oops: sorry to mislead......that's not my electric hen, just a pic I pinched. I use a ceramic dull emitter bulb that hangs outside the brooder. It doesn't give off any light so the chicks get used to natural day and night-time. I don't like the idea of them having artificial infra-red or white light during the night. I shorten the chain on the lamp by a link or two each day until they're off heat by 3 weeks (in the house).
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...