EGLU HEAT PROBLEMS

[Ness3103]

i just wondered how you fix them to your runs obviously i'd put hooks at the top but i'd like to secure the bottom somehow so it doesn't blow up in the wind.

 

this is a pic of half my run

 

http://www.facebook.com/home.php?ref=home#/photo.php?pid=2731788&id=758333221

[Lewis]

I just made holes in it and used string and a bungee on one side (the top of the eglu run)

[Plum]

I use one on top of cube and then another down sides. I use Softies through the holes in top then bricks on the bottoms away from the cube and bungees to stop it all flapping about. Keeps them nice and dry and gives air channels.

 

Except last night in the terrible winds when part blew off and rain got in.

 

Just bungees would probably be ok.

 

Edited to say just looked at your run Its great. I would tie the top and make holes and tie the sides and bottom. You could turn a hem to make a channel at the bottom to thread something heavy through to keep it down.

[Olly]

Bulldog clips (they do rust after a while) or soft plastic pegs from Lakeland. I've also got the Omlet shade partly over the top of mine, and made holes in the shower curtain so the bungee clips can go through it.

[FiggyPudding]

not about the shower curtains...but i do like the table your eglu is on - where is it from ? I could do with one, make a bit more floor space in our run

[Ain't Nobody Here]

I use hooks screwed into the run and make eyelets using one of those kits.

 

I started off using dowling through "hems" made with tarpaulin tape (made them really easy to roll up) but the tarp tape just doesn't last . I'm now redoing my blinds with eyelets and top and bottom and hooks and bungees to hold them in place.

 

(There are some photos in my sig link but that's when they were all new and clean!)

[kevtheplumber]

cable ties

[Falkor]

Plastic clothes pegs here.....with long bungees over the top on one of my cube runs.

 

Peg are as it means I can whip it off on a dry day!

[Redwing]

I put a tarp on my big run today, I attached the top two corners then used two bungees linked together to run all around the tarp so its snug to the run

[Ness3103]

not about the shower curtains...but i do like the table your eglu is on - where is it from ? I could do with one, make a bit more floor space in our run

 

my dad made it for me, in fact he made the whole wir (with the help of os, oh & the twins)

i'm going to ask him to make me another one for my (hopefully after xmas)

 

 

thank you all i've got a few ideas now i didn't know you could get eyelet kits, i'll have to check that out

[Lewis]

but i do like the table your eglu is on - where is it from ? I could do with one, make a bit more floor space in our run

Aviaries 4 u sell coop tables

[Falkor]

Lewis you beat me!!!

 

http://www.aviaries4u.co.uk/chicken_run_customisations.htm

£49.00 according to the website but delivery will be charged i believe depending on location

 

Em

x

[Lewis]

Lewis you beat me!!!

 

http://www.aviaries4u.co.uk/chicken_run_customisations.htm

£49.00 according to the website but delivery will be charged i believe depending on location

 

Em

x

Sorry

... its £15 delivery for a coop table which I think is pretty steep so you might want to collect

 

Or see if you can get a coffee table from B&Q or ikea

[The Dogmother]

Milletts sell some plastic eyelets by Arro, about £2.99 for 10. I use those on each corner and then bungee hooks from B&Q.

 

[Falkor]

Milletts sell some plastic eyelets by Arro, about £2.99 for 10. I use those on each corner and then bungee hooks from B&Q.

 

 

Now I like the look of those........do they just clip shut or do you need a tool?

[The Dogmother]

They do clip together and punch through the plastic as they do it, but I use a small hammer to make sure they are porperly clicked. I recycle them and have had 10 for about 5 years.

[Falkor]

Found them online:

 

http://www.millets.co.uk/camping/camping-accessories/tent-accessories/product/095713.html

 

purchased

[The Dogmother]

That's them, they've obviously changed supplier.

[Ness3103]

they look fab i'll be ordering those